Add:No.1299 Tengfei East Road, Tengzhou City Of Shandong China
Model NO.: CK61160
Processing Accessory: Chuck CNC Lathe
Tool Holder: Single-tool Holder CNC Lathe
Controlling Mode: CNC
Setting Mode: Floor-type
CNC System: Siemens/Fanuc/GSK
Distance Between Center: 1500mm
Type of Tool Carrier: Vertical 4 Position
Span of Guideway: 1100 mm
HS Code: 8458110090
Type: Horizontal Lathe
Guide Rail: Horizontal Guide Rail
Power Source: Electric
Automatic Grade: Automatic
Precision: High Precision
Max.Swing Diameter: 1600mm
X/Z Positioning Precision: 0.03/0.04mm
Main Motor Power: 30kw
Warranty: One Year
Transport Package: According Customer′s Demand
Customization Service Can Be Supplied If You Can Tell Us Your Specific Demand !!!!!!
A. Function and features of the CK61100 lathe:
1.This machine is suitable to machine shaft parts of gas turbines, rotor, rollers and other large high-precision.
2. They are also suitable for turning external cylindrical, inner hole and end face. In addition it can do groove broaching, drilling, boring and trepanning.
3. Spindle bearings use domestic famous-brand company products.
4. Headstock takes symmetrical structure to make thermal deformation be even, avoiding the spindle center generates offsets. And also adopts oil bath circulating lubrication to reduce thermal deformation
5. About transmission system using HIWIN screw to ensure its high efficiency and accuracy.
6. Frond end of the spindle adopts three-supporting structure of two-way angular in touch with the ball bearing to improve its accuracy and enhance its rigidity
7. Gears in headstock and guide way are processed by quenching to ensure accurate transmission and high rigidity.
B. Main technical parameters:
|Swing over bed (mm)||1000||1250||1640|
|Swing over carriage (mm)||630||880||1250|
|Max. loading capacity (kg)||6000|
|Max. length of workpiece (mm)||1500-5000|
|Width of guideway (mm)||1100|
|Power of spindle (kw)||30|
|Range of spindle speed (rpm)||3.15-315|
|Spindle bore (mm)||130|
|Chuck (mm)||4-jaw 1000|
|X/Z min feed increment (mm)||0.001/.001|
|X/Z rapid speeds (mm/min)||3000/6000|
|Turret working station||V4|
|Size of turret (mm)||40*40|
|Indexing repeatility (mm)||0.01|
|Power of rapid of turret (kw)||1.5|
|Diameter of tailstock quill (mm)||160|
|Travel of tailstock quill (mm)||300|
|Taper hole of tailstock||Morse 6|