Add:No.1299 Tengfei East Road, Tengzhou City Of Shandong China
Automatic Grade: Automatic
Certification:CE, ISO 9001
HS Code: 8459210000
Structure: Vertical Drilling Machine
Controlling Mode: CNC
Hole Diameter: <50mm
1. The machine has good rigidity, optimized structure, higher strength, better anti-shake and more beautiful preview.
2. The machine has 3 power heads: One vertical drilling head for the drilling on the web plate, and two horizontal drilling power heads on the two side of the machine for the drilling on the flange plates. Each power head can do continuous drilling in the feed-in direction 640mm after once feeding until to complete all the drilling process of one hole group. It is connected by taper shank module between drill bit and spindle.
3. These 3 drilling spindles can be controlled separately. They can drill simultaneously and also separately.
4. Comparing with the carriage conveyor, the servo motor driving to feed in with the examining by the two encoders can process longer work piece without the length limitation of carriage conveyor.
5. Movable side and upper unit is each equipped with a detecting cylinder with raster, which can realize the control symmetry of web and flange plate of H-beam and meet customers' processing requirements.
6. For the spindle of power head is controlled by the hydraulic sensing, it can alternate among fast feed-in, working feed-in, fast feed-out automatically, no need to set the length of drill bit and the thickness of work pieces. Therefore the working efficiency is improved greatly.
7. The spindle motors and deceleration motors of power heads which are imported from the SEW company of Germany guarantee the good performance, high reliability, and low noise of our products.
8. It can be programmed automatically with the friendly software interface. For the programming software is independent to the host computer, it can install in any computer to realized the programming in different places. The programming can be copied directly or sent to the equipment by internet for using.
9. The drilling machine has reasonable electric control system and famous industrial computer. 7 axes controlling make it stable, reliable and convenient for operation.
10. Classic components, the hydraulic components, all the electric components (include button switch etc), ball screw, and linear guide rail are the products of famous companies in home and abroad.