Cattle and sheep nutrition lick bricks are produced through a series of processes such as feeding, mixing, pressing and packaging. The most important link is brick licking and pressing, and the important equipment used is brick licking and briquetting machine. The cattle and sheep nutritious brick licking hydraulic press produced by our company is a kind of hydraulic briquetting equipment, which has high pressure, can be formed at one time, and has a high compaction density. The pressed product has a smooth and beautiful appearance. If customers want to produce products of different specifications, they can customize multiple sets of molds to achieve the goal of one machine with multiple uses.
The working pressure cannot be adjusted up during the operation of the cattle and sheep licking brick hydraulic press. If we want to solve it, we must first know what is causing it:
1. Check whether the plug-in valve and reversing valve of the salt brick machine are stuck;
2. Check the circuit failure of the salt brick machine. It is very likely that the hydraulic pressure cannot rise under normal conditions. It is recommended to use a screwdriver to poke the small reversing valve to see if it is stuck, and then check the indication of the rising small valve. Whether the light is on;
3. The main relief valve in the salt brick machine system is seriously worn, causing overflow and debris, so it will be stuck;
4. The flushing valve on the upper part of the hydraulic cylinder of the Niuyang Licking Brick Hydraulic Machine is not opened, so it cannot rise under normal circumstances;
5. Check whether the cylinder is broken.
6. Whether the hydraulic system of cattle and sheep licking bricks is adjusted to balance and the beam is stuck, of course, there are not many such problems.
7. The total flow of the pump is abnormal, such as the total flow of the pump and the working pressure become inversely proportional
8. See if the working pressure of the hydraulic drive system of the salt brick machine is under normal conditions
9. The lower cavity directional valve of the hydraulic drive system of the salt brick machine is stuck, and the oil enters the upper and lower cavities at the same time.
10. The spool of the filling valve of the hydraulic drive system of the salt brick machine is stuck. This is likely to be caused by debris or the spring may be broken.