1. Maintain a good lubrication state, regularly check and clean the automatic lubrication system, add or replace grease and lubricating fluid, so that each moving part such as the lead screw guide rail is always maintained in a good lubrication state, so as to reduce the speed of mechanical wear.
2. Carry out the inspection and adjustment of the precision of the small CNC vertical lathe to reduce the shape and position deviation between the moving parts, including the inspection and adjustment of the tool change system, the worktable exchange system, the lead screw, and the backlash.
3. Frequent cleaning. The surrounding environment of the small CNC vertical lathe is too dirty and too much dust may affect the normal operation of the small CNC vertical lathe; the circuit board is too dirty, which may cause a short circuit; the oil-water filter, the safety filter, etc. are too dirty, due to insufficient pressure , Poor heat dissipation causes malfunctions. Therefore, regular sanitation cleaning must be carried out.