Multifunction Four Column and Three Beam High Speed Hydraulic Press
One-stop hydraulic press factory in China
A comprehensive manufacturing enterprise integrating hydraulic press R&D, production, sales, installation and commissioning, after-sales service and parts supply.
Integrating industrial chain resources, providing "full process services" from demand analysis to product delivery and post-maintenance, you can efficiently complete the purchase and use of hydraulic presses without coordinating between different suppliers.
Multifunction Four Column And Three Beam High Speed Hydraulic Press
Three-beam four-column hydraulic press is a general-purpose equipment that uses hydraulic power to form materials through a frame structure composed of three crossbeams (upper beam, slide block, worktable) and four columns. It is widely used in metal processing, plastic products, powder metallurgy and other fields.
Performance advantages: high efficiency, stability, energy saving
Hydraulic press configuration advantages
SUNSHINE machinery Workshop co-operation projects
Hydraulic system
Integrated control of cartridge valve: Reduce leakage points, reliable operation, long life, and small hydraulic shock.
Adjustable pressure and stroke: Working pressure, slider stroke and speed can be adjusted within the specified range, adapting to both fixed pressure and fixed stroke molding processes, and has pressure holding and delay functions.
Electrical control system
PLC control: Supports manual, semi-automatic and automatic operation modes, and realizes various process cycles such as adjustment, two-hand single cycle, and continuous work.
High-precision control: Pressure deviation ±1%, repetition accuracy of ±0.03mm, equipped with infrared safety grating to protect operators.
Energy saving and efficiency
Low heat design: The calorific value of the hydraulic system is 10%-30% of that of traditional hydraulic presses, the oil tank volume is smaller, and the oil change cycle is extended.
High-efficiency output: Through acceleration and deceleration control and energy optimization, the working rhythm is several times higher than that of traditional equipment, saving 50-70% energy.
Technical Parameters
| Technical Parameters | Y32-100T | Y32-150 | Y32-200T | Y32-250T | Y32-315T | Y32-500T | Y32-630T | Y32-800T | Y32-1000T | Y32-1200T | |
| Nominal pressure(KN) | 1000 | 1500 | 2000 | 2500 | 3150 | 5000 | 6300 | 8000 | 10000 | 12000 | |
| System pressure(Mpa) | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
| Slider stroke(mm) | 260 | 260 | 500 | 500 | 500 | 700 | 800 | 700 | 800 | 1100 | |
| Maximum opening height(mm) | 440 | 350 | 800 | 720 | 800 | 1000 | 1300 | 1200 | 1500 | 1700 | |
| Effective size of workbench(mm) | The left and right sides | 640 | 640 | 720 | 720 | 800 | 1400 | 1400 | 1200 | 1500 | 3500 |
| The front and rear sides | 550 | 550 | 700 | 700 | 700 | 1400 | 1400 | 1500 | 1300 | 2000 | |
| Slider speed(mm/s) | ldle stroke | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 120 | 150 |
| Feeding | 14 | 14 | 14 | 14 | 14 | 15 | 12 | 12-16 | 12 | 17.5 | |
| Back tracking | 72 | 72 | 72 | 65 | 69 | 130 | 130 | 130 | 130 | 135 | |
| Ejection force(KN) | - | - | - | - | - | 630 | 1000 | 1000 | 1000 | 3000 | |
| under cylinder stroke(mm) | - | - | - | - | - | 260 | 320 | 320 | 320 | 450 | |
| Motor power(KW) | 5.5 | 5.5 | 11 | 11 | 15 | 22×2 | 22×2 | 22×2 | 30×2 | 37×2 | |
Optional accessories:
●Mobile working joint
●Hydraulic pad for reverse stretching
●Blanking buffer device
●Photoelectric protection device
●Touch screen
●Displacement sensor
●Pressure sensor
●Proportional control system
●Servo motor pump group
●Upper computer system
●Refrigeration oil cooler
●Mold quick clamping and mold changing device
●Imported ball valve and pilot valve
Equipment application scenarios
Metal processing
1. Processes such as metal sheet stretching, punching, bending, flanging, cold extrusion, such as the forming of automotive covers and aviation parts.
2. Double-cylinder design (some models): improve work efficiency and processing accuracy to meet high-precision processing requirements.
Non-metal material processing
Non-metal material processing
Improve work efficiency and processing accuracy to meet high-precision processing requirements.
Non-metallic material processing
Can press powder products (such as ceramics, abrasives, metal powders), plastic products and insulating materials, and support hot pressing, briquetting, straightening and other processes.
Customized expansion
Optional accessories such as punching buffer device, mobile workbench, photoelectric protection device, mold heating and temperature control device can be used to meet special process requirements.
Main Functions
With three beam and four column structure,optimized design by computer,simple,economical and practical.the cartridge valve integrated system is applicable to the hydraulic control system,with reliable actuation,long service life and hydraulic shock,reducing connection lines and leaking points.the independent electrical control system works reliably and runs directly,convenient for maintenance.the button is suitable for centralized control,with adjusting(jog) and single (semi-auto)operating mode.two forming processes including constant stroke and constant pressure are attainable,featuring pressure maintaining and time delay.the work pressure and stroke can be adjusted within specified range based on process requirements.
Main Features
Application:this series hydraulic press is applied to drawing,bending ,flanging,cold extrusion,blanking and other process about metal materials,also to calibration,press fitting,and compression molding about powder products,abrasive products,plastic products and insulating materials.
Optional devices
Blanking buffer device/traverse workbench/light curtain safety protection device/oil cooling installation/touch industrial display/knockout device(hydraulic or mechanical)/mold quick clamping mechanism/imported PLC/floating guide and rolling bracket for changing mold/overhead hydraulic system/sliding block locking mechanism.
FAQ
Which is the right press or machinery for you?
In particular, it is difficult to tell about the right system for an application. The specifications can be drawn only by specialists & engineers, after consulting the customers.
What quality can I expect from SUNSHINE machinery?
We regards the product's quality as the most important duty.Based on this attitude,we create a series of procedure to manage and monitor the whole process of manufacturing for better quality.With the excellence work on research,manufacturing,inspection,test,sale and after-sale service,we always serve the most exquisite machine and provide the most enjoyable service to our customer.
What about after sales services?
24-hour technical support by email or on line,User-friendly English manual for machine using and maintaining .
Do you manufacture products?
Yes. We have world class infrastructure to produce a wide range of industrial hydraulic presses and CNC vertical lathe in various configurations including standard and custom-designed machines.
Do you provide customized solutions?
All our solutions are tailored according to the preferences of the customers.
What does SUNSHINE machinery offer?
SUNSHINE machinery offers a comprehensive range of Press and CNC vertical lathe. including hydraulic press, compression molding presses, deep drawing presses, plastic molding machines, CNC vertical lathe,CNC drilling machine,CNC machining center,etc.
How to install the machine?
We will send technician overseas installing and training for our customer.
If you are in need of multifunction four column and three beam high speed hydraulic press to help with your business, please rest assured to wholesale with us. We are one of the leading such manufacturers and suppliers in China with over 20 years' history. And the customized service is also available.
Hot Tags: multifunction four column and three beam high speed hydraulic press, China, suppliers, manufacturers, wholesale, customized, Longmen Frame Hydraulic Press, Y32 Series 100T 800T Hydraulic Press Machine, blanking hydraulic press, 100 ton single arm hydraulic press, Horizontal Axletree Hydraulic Press, security door hydraulic machine
Send Inquiry
