News

How To Operate The Manual Continuous Feed Of The Vertical Machining Center

Turn the ModeSelect knob to the Manual position. Rotate the feed rate adjustment knob to select the appropriate feed rate. When the paper feed direction button is pressed, the c...

Nov 11, 2021

What Are The Performance Characteristics Of The Single-column CNC Vertical Lathe

The single-column CNC vertical lathe is an excellent product designed and produced by Shandong Yuyang Heavy Industry Machinery Co., Ltd. on the basis of absorbing the advanced t...

Nov 08, 2021

How To Reduce The Processing Cost Of CNC Vertical Lathes

At present, CNC vertical lathe processing should consider several aspects. Like traditional lathes, CNC vertical lathes are also used to machine the rotating surface of parts. U...

Nov 02, 2021

What Are The Operating Procedures And Precautions For CNC Vertical Lathes

1. Enter the operating room and wear suitable overalls, work caps, shirts must be tied under trousers, open sleeves must be fastened, female students must put long hair in caps,...

Oct 26, 2021

How To Buy Shandong CNC Vertical Lathe

CNC vertical lathe is more adaptable than other lathes. Suitable for processing small and medium-sized plates and cover parts. There are many types of CNC vertical lathes on the...

Oct 24, 2021

Solutions For Common Failures Of Small CNC Vertical Lathes

1. The solution to the control failure of the small CNC vertical lathe beam. The transmission cylinder of the lathe did not move and the vertical beam was relaxed. The solenoid ...

Oct 20, 2021

The Maintenance And Oil Change Items Of The CNC Vertical Lathe Are As Follows

1. Check the lubricating oil level to ensure the lubrication of the machine tool. 2. Check whether the coolant in the coolant tank is sufficient, and it cannot be increased in t...

Oct 14, 2021

Reasons For The Locking Of The Special CNC Vertical Turning Tool Holder For T...

(1) The position of the sending plate is not aligned. Remedy: Disassemble the top cover of the knife holder, rotate and adjust the position of the sending plate, make the Hall e...

Oct 08, 2021

What Conditions Need To Be Met When Using The CNC Vertical Lathe

First, the environmental requirements for the site selection of CNC vertical lathes The position of the CNC vertical lathe should be far away from the vibration source, avoid th...

Oct 07, 2021

Small CNC Vertical Lathe Processing Technology

Small CNC vertical lathe, also called CNC small vertical lathe, is a small CNC vertical lathe, usually a single column structure. It is suitable for the production and processin...

Oct 06, 2021

How To lathe Out Daily Maintenance Of CNC Vertical Lathe

Clean the dirt and dust of the CNC vertical lathe. After working every day, cut off the power, and clean the surface of the lathe without oil, iron filings, and the surface of t...

Oct 05, 2021

What Are The Requirements For The Spindle Of The Vertical Lathe

The vertical lathe spindle refers to the axis that drives the workpiece or tool to rotate on the machine tool. The main shaft components are usually composed of main shaft, bear...

Oct 02, 2021