Double column CNC vertical lathe is used to process some comparative parts of the mechanical equipment, the accuracy of processing is relatively high, after the end of the work needs to be cleaned, the following will briefly introduce the relevant content.
The use of double column CNC vertical lathe effectively reduces the processing time and auxiliary time of parts, improves the efficiency of production to a certain extent, and can also reduce the processing process of products with other tools.
Double column CNC vertical lathe needs to clean and lubricate the cooling system, pipelines, including oil holes, oil cups, oil lines, linoleum filtration devices when cleaning, and the main requirements are as follows:
1. Make sure that the oil window is clear and bright, the oil label is eye-catching, and the oil quality meets the requirements when refueled to a certain position. The oil tank, oil pool, and filter device are clean inside and outside, free of dirt and impurities.
2. It is necessary to ensure that the oil line of the CNC vertical car is complete, the linoleum is not aging, the lubricating oil road is smooth, and there is no oil leakage and water leakage. The oil gun and oil pot are easy to clean and use, the oil nozzle and oil cup are complete, and the hand pump and oil pump are easy to use.
3. Remove each protective cover, check the lubrication, and scrub the guide rail, light rod and lead screw.
If you want to buy a double column CNC vertical lathe, welcome to contact our company for consultation related content.