Stainless Steel Deep Drawing Press
The machine can process workpieces with diameters ranging from 160 mm to 400 mm and drawing depths from 50 mm to 220 mm. It is suitable for forming 201 and 304 stainless steel sheets, two commonly used grades in cookware production, and can be configured to accommodate different raw material specifications.
Send Inquiry
Product Details ofStainless Steel Deep Drawing Press
If you are in need of stainless steel deep drawing press to help with your business, please rest assured to wholesale with us. We are one of the leading such manufacturers and suppliers in China with over 20 years' history. And the customized service is also available.
The production of stainless steel stockpots, woks, and lids typically involves several stages, including blanking, deep drawing, forming, and trimming.
This hydraulic press is specifically designed for deep drawing stainless steel cookware. It is suitable for kitchenware and metal products manufacturers producing cookware in a variety of sizes and specifications. Depending on the product design and tooling configuration, the machine can be used to form round pots, shallow cookware, and lids.
By changing the molds and adjusting the process parameters through the servo control system, manufacturers can produce stockpots, woks, and lids with different diameters and drawing depths using the same press.
The hydraulic deep-drawing press can process workpieces with diameters ranging from approximately 160 mm to 400 mm and forming depths from approximately 50 mm to 220 mm. It is suitable for 201 and 304 stainless steel sheets, which are commonly used in cookware manufacturing. Depending on the workpiece dimensions, sheet thickness, forming process, mold requirements, and required drawing depth, the machine can be configured with either a 315-ton or a 500-ton pressing capacity.
The machine is equipped with a hydraulic cushion and a servo-controlled speed regulation system. These features allow the movement speed of the main cylinder to be adjusted according to the requirements of each forming stage. Combined with the appropriate molds and process parameters, this configuration allows the press to handle a variety of cookware products with different diameters and drawing depths.
| Technical Parameters | Y32-315T | Y32-500T | |
| Nominal pressure(KN) | 3150 | 5000 | |
| System pressure(Mpa) | 25 | 25 | |
| Slider stroke(mm) | 500 | 700 | |
| Maximum opening height(mm) | 800 | 1000 | |
| Effective size of workbench(mm) | The left and right sides | 800 | 1400 |
| The front and rear sides | 700 | 1400 | |
| Slider speed(mm/s) | rapid advance | 120 | 120 |
| Feeding | 14 | 15 | |
| Back tracking | 69 | 130 | |
| Motor power(KW) | 15 | 22×2 | |
Main Processed Products and Scope of Application
The stainless steel deep drawing press is mainly designed for manufacturers of stainless steel cookware and other metal products. It can be used to produce a variety of items, including:
Stainless Steel Soup Pots:Suitable for deep drawing and forming pot bodies in different diameters and depths.
Stainless Steel Woks:Used to form wok bodies through a deep drawing process, accommodating different pan designs and specifications.
Stainless Steel Pot Lids:Suitable for pressing and drawing metal sheets into different lid shapes, depending on the product design and mold configuration.
Other Metal Products:The machine can also be considered for producing other round metal containers and shallow-stamped components that use similar forming processes.
Hydraulic Cushions: Why Are They Important in Deep Drawing Cookware?
During the deep drawing of stainless steel cookware, the main cylinder applies the forming force to the sheet metal, while the hydraulic cushion provides an adjustable upward force to the blank holder. This force helps hold the edges of the sheet in place while allowing the material to flow into the die.
If the blank-holding force is too low, excess material may gather around the edges and cause wrinkles. If the force is too high, material flow becomes restricted, increasing the risk of tearing. The hydraulic cushion allows the blank-holding force to be adjusted according to the material properties and forming requirements, helping achieve a balance between material flow and workpiece quality.
How to Choose Between a 315-Ton and a 500-Ton Hydraulic Press
The required pressing capacity depends primarily on the forming force needed for the workpiece. Several factors should be considered, including the material grade, sheet thickness, finished product diameter, drawing depth, and die design.
A 315-ton hydraulic press is generally suitable for small and medium-sized workpieces, typically with diameters of 160–300 mm, moderate drawing depths, and relatively thin 201 or 304 stainless steel sheets. It can be used to produce a range of common cookware products, including soup pots, woks, and pot lids.
A 500-ton hydraulic press is more suitable for applications requiring greater forming force. It may be the better choice for workpieces with diameters of approximately 360–400 mm, drawing depths exceeding 160 mm, or thicker stainless steel sheets.
To help determine the appropriate machine capacity, you can provide us with the material grade, sheet thickness, product diameter, drawing depth, and die design. Our technical team can evaluate these details, calculate the required forming force, and recommend a suitable press configuration.
Customized Molds
Even when a machine's rated pressing force meets the forming requirements, production problems can still occur if the die height, bolster dimensions, slide stroke, or blank-holding system are not properly matched to the machine.
The maximum outer diameter and required drawing depth of the finished product.
The overall dimensions of the upper and lower dies
The available die-mounting space and the dimensions of the machine's bolster.
The main cylinder stroke and maximum daylight opening.
The working stroke of the hydraulic cushion and the required blank-holding force.
The ease of die installation and removal when changing between different products.
Which Industries Is This Hydraulic Press Suitable For?
1. Stainless Steel Cookware Manufacturers
Manufacturers of stainless steel stockpots, woks, lids, and other everyday kitchenware that require a stable and reliable sheet metal deep-drawing process.
2. Metal Products Processing Companies
Businesses that manufacture metal containers, cylindrical shells, and shallow-drawn components in various specifications, often requiring mold changes to accommodate different customer orders.
3. Sanitary Ware Manufacturers
Manufacturers of stainless steel sinks, basin shells, and water tank components, where stable and controlled blank-holding force is important for the forming process.
4. Automotive Parts Manufacturers
Manufacturers of small, thin-walled drawn components within the machine's applicable size range, including parts used in automotive interiors and functional assemblies.
5. Home Appliance Component Manufacturers
Manufacturers of drawn metal components, such as housings and inner liners for small household appliances, including electric kettle bodies and inner containers.
Why Choose Our Hydraulic Presses?
- Over 20 years of experience in machinery manufacturing
- 24-hour online support
- Made-to-order production
- Free trial pressing using customers' own workpieces before shipment
- 24-Month Warranty
- Comprehensive solutions for hydraulic press applications
- Strict quality control and multiple stages of testing
- On-site installation, commissioning, and operator training available
Transportation and Export Packaging
Rust-proofing treatment
Customized export packaging
our factory appearance
Hydraulic presses are heavy industrial machines, so their packaging and transportation arrangements need to take into account the machine's weight, dimensions, structure, and shipping distance.
Before shipment, we develop a suitable export packaging plan for each machine based on its specific characteristics. We also consider the packaging and transportation requirements of the destination country, whether the equipment is being shipped to Russia, Turkey, Europe, the Middle East, or Southeast Asia.
Contact us today with your product drawings or specific requirements. Our team will evaluate your application, recommend a suitable hydraulic press for your deep-drawing process, and develop a machine configuration and quotation based on your needs.
Hot Tags: stainless steel deep drawing press, China, suppliers, manufacturers, wholesale, customized, coupling four column hydraulic press, fiberglass four column hydraulic press, high speed hydraulic press, palletizing four column hydraulic press, Single arm Hydraulic Press, washer four column hydraulic press
Send Inquiry
